LED / Fiberglass Hull / DC powered Underwater Lights
Sea Vision SV19LED
This LED adaptation of the SV19 has been introduced due to the high demand for an LED light that can be serviced from the inside of the boat. This feature allows for any required servicing or repair ofthe LEDs to be completed with the boat in the water, a convenient feature. The domed lens magnifies and intensifies the LED light ouput to give a pleasant wide angled beam of light not normally associated with LEDs. This light is ideal for small and midsized boats, especially if they remain in the water and operates on 12 and 24 VDC systems.
The Sea Vision SV43 LED surface mounted model is designed specifically for fibre-glass and wood boats less than 9 metres. It is perfect for boats with limited interior access. The LED array rests in a leak and corrosion proof bronze housing. Both white and blue LED colours are available. The convex crown glass used allows for more of a flood effect than comparable LED models on the market. It is available in 12 volt.
This model is excellent for trailerable boats and any boats with limited available power including sportfishers and cruisers.
For photo of the installed light move cursor over the picture.
Patent pending.
Sea Vision SV43 Thru Hull
The Sea Vision SV43 LED thru hull model is designed specifically for fibre-glass and wood boats less than 9 metres. It is perfect for those with limited interior access but still require a thru hull fitting. The LED array rests in a leak and corrosion proof bronze housing. Both white and blue LED colours are available. The convex crown glass used allows for more of a flood effect than comparable LED models on the market. It is available in 12 volt.
The Sea Vision SV42 LED surface mounted is based on the same design as the SV43 but for larger boats up to approx. 12 metres. It offers a wider aperture and greater light output than SV43. Both white and blue LED colours are available. The convex crown glass used allows for more of a flood effect than comparable LED models on the market. It is available in 12 / 24 volt. This model is excellent for trailerable boats and any boats with limited available power.
For photo of the installed light move cursor over the picture.
Patent pending.
Sea Vision SV42 Thru Hull
The Sea Vision SV42 LED thru hull is based on the same design as the SV43 but for larger boats up to approx. 12 metres. It offers a wider aperture and greater light output than SV43. Both white and blue LED colours are available. The convex crown glass used allows for more of a flood effect than comparable LED models on the market. It is available in 12 / 24 volt. This model is excellent for any boat which has limited interior access but desires a thru hull installation avoiding any exterior wiring.
For photo of the installed light move cursor over the picture.
Patent pending.
Sea Vision SV44 Surface Mount
The Sea Vision SV44 underwater light has a six LED array in a thermally conductive plastic housing that incorporates a revolutionary convex lens. This innovative patent pending design creates greater light dispersion and magnification for a dynamic underwater lighting effect. This light is ideal for any boat wanting a surface mounted application or has interior access problems where thru hull lighting is difficult to install.
For photo of the installed light move cursor over the picture.
Patent pending.
Sea Vision SV44 Trim Tab
Sea Vision by Underwater Lights USA and Bennett Trim Tabs have joined efforts and developed the Sea Vision SV44 underwater light. This is a unique concept in underwater lighting in that it combines the light and the trim tab in one installation. This allows for a simpler install and alleviates the necessity for additional holes in the transom. Utilizing the actuator on the trim tab allows the light to be angled lower in the water for added effect. It is suitable for all small boats under 12 meters. It is available in 10-28 volt and white or blue LED array.
