LED / Aluminum Hull / AC powered
Underwater Lights


SV14 LED

The Sea Vision SV14 LED weld in model for aluminum or steel hulls can be installed in the transom or the hull, it utilizes high density LED chip technology which combined with the latest award winning silicone optics produce an industry leading lighting effect. Additionally the silicone optic protects the LED chip from moisture thus ensuring a long life and overcoming one of the major reasons for light failure. The lights can be welded at adjustable angles to suit all hull shapes. The hull shape and positioning will dictate the angle of the light you require, angles available are 0 to 50 degree. The vessel must be hauled out for installation although any maintenance can be done in the water from within the hull. The light body is designed to act as a cofferdam / second-ary containment for additional security.

 


RINA

SV14 LED retrofit kit

Yachts with the older style SV14 HID lights now have the option of being retrofit with current fixtures with the latest in LED technology. Sea Vision offers a direct replacement for their HID lights which retains the existing thru hull assembly and allows the exchange to be accomplished without hauling the Yacht. This LED replacement utilizes the latest High Density LED chip technology and now incorporates a silicone optic, a first for the industry. This optic envelops the LED preventing contact with moisture and increases the light output by 30% when compared to the equivalent HID. This is a great advance in LED underwater lighting as moisture is a common cause of failure.

The fixtures will retain their present ABS, Lloyds or RINA approvals and the heat sync/secondary containment has been approved and tested to meet the new L.R. pressure tests for installation without additional cofferdams, also a first for the industry.

 


RINA

SV37 LED

The Sea Vision SV37 LED weld in model for aluminum or steel hulls can be installed in the transom or the hull, it utilizes high density LED chip technology. The lights can be welded at adjustable angles to suit all hull shapes. The hull shape and positioning will dictate the angle of the light you require, angles available are 0 to 50 degree. The 98mm / 3.8" aperture lens gives the largest volume of light available in a welded fixture. This fixture is primarily for larger yachts.

 


www.SeaVision.com © 2008-2017 All Rights Reserved.

Sea Vision by Underwater Lights USA is the World Leader in Quality Boat and Yacht Lights