HID / Aluminum Hull / Ac powered Underwater Lights
Sea Vision SV14
(Aluminum)
The Sea Vision SV14 weld in model for aluminum hulls can be installed in the transom or the hull, it utilizes a 150 or 250 watt metal halide lamp and 110 or 230 volt AC power. The lights can be welded at adjustable angles to suit all hull shapes. The hull shape and positioning will dictate the angle of the light you require, angles available are 0-50 degree. All angle options are available on request.
We are available to assist you with placement on any type of vessel.
For photo of the installed light move cursor over the picture.
SV14 (Aluminum). 38 degree mount shown
Sea Vision SV37
The Sea Vision SV37 weld in model for aluminum or steel hulls can be installed in the transom or the hull, it utilizes a 250 watt HID metal halide lamp and 110 ? 230 volt AC power. The lights can be welded at adjustable angles to suit all hull shapes. The hull shape and positioning will dictate the angle of the light you require, angles available are 0 to 50 degree. The 98mm / 3.8? aperture lens gives the largest volume of light available in a welded fixture. This light was specifically designed to include an intricate cofferdam that is welded to the thru hull providing a very easy way for the shipyard to satisfy the demands of the classification societies for secondary containment of the lights. This fixture is primarily for larger yachts.
The Sea Vision SV38 weld in tank light model for aluminum orsteel hulls can be installed in the transom or the hull, it utilizes a 150 watt HID metal halide lamp and 110-230 volt AC power. The lights can be welded at adjustable angles to suit all hull shapes. The hull shape and positioning will dictate the angle of the light you require, angles available are 0 to 50 degree. The SV38 weld in tank model was specifically designed to provide a watertight light for use inside freshwater tanks and ballast tanks. It utilizes a hydraulic hose or tubing to route the wiring from the light to a tank boundary.
